– Feature –

• The main bracket is made of square steel anti-corrosion spray + aluminum alloy + stainless steel, and the kettle cover is made of PTFE, which is corrosion-resistant and has good sealing performance.

• The kettle cover and the upper part of the kettle cover can be raised and lowered electrically, and the kettle body can be rotated 150° to the left by the handwheel

• High borosilicate glass, high temperature, and corrosion resistance, temperature resistance: -80℃—250℃.When using, if you need to close the jacket circulation port at the same time, you must add and open the exhaust valve to release the pressure before the valve and circulation port to prevent the jacket from holding pressure rupture.

• Fine-tuning through the knob, the dual-display speed control box can digitally display the speed and the temperature of the material in the kettle, low noise

• The bottom of the machine is equipped with a Fuma swivel wheel with brake, which can move as a whole

– Application –
When the material is heated and reacted, the evaporation efficiency can be improved under vacuum conditions (a vacuum device needs to be connected), and the solvent vapor is cooled into a liquid when it passes through the glass condensing coil (a cooling device needs to be connected), which can be returned to the kettle, or can be passed through. The lower valve of the return elbow is recycled. After the reaction is completed, the material can be discharged from the side discharge port at the bottom of the kettle.
Buffer device: After the inlet and outlet of the jacket are connected to the stainless steel hose, it is fixed to the bracket and then connected to the external circulation tube to reduce the pressure of the inlet and outlet, and also to avoid the breakage of the connection part between the glass jacket circulation port and the circulation tube.
Adopt PT100 temperature sensor, 304 stainless steel material, coat transparent PTFE tube, double anti-corrosion.
Stirring, lifting fuse safety protection.
Parameter
Model: SJ-10L
Reaction capacity: 10L
Inner diameter 230mm
Outer diameter 290mm
Inner length 354mm
Mezzanine capacity: about 8L
Voltage frequency: 110V/60HZ
Machine power: 130W
Stirring motor power: 90W (1/3)
Lifting motor power: 40W (1/12.5)
Stirring speed: 0-450rpm/min
Temperature range of kettle body: -80°C~ +250°C
Temperature measurement accuracy: ±1°C
Vacuum degree: 0.098Mpa
Stirring paddle: Φ17×700H, Blade diameter: 150
Condenser: Φ100×600H(mm) Bottom 60Flange
Condensation area: 0.4㎡
Lifting stroke of the main machine: 500m (subject to the stirring rod leaving the upper mouth of the kettle cover 50mm)
Rotation of the reaction body: 150° to the left
Packing size: 1870*600*1020mm
Packing weight: 170KG